If you want to prevent binder build-up on pipes, valves, or perhaps pumps.

The correct steps for operating a vacuum sintering furnace Vacuum sintering furnaces are furnaces that use induction heating for maintenance sintering of heated items and can be divided into types such as industrial frequency, medium frequency, and high frequency.

The overall design of the vacuum dewaxing and sintering integrated furnace requires dewaxing, pre-sintering, sintering and rapid cooling to be completed at one time. In terms of structure, it is different from ordinary vacuum sintering furnaces in that: a graphite liner is added, and liner d

Vacuum Si2oz sintering furnace pneumatic vacuum valve cannot open? The pneumatic valve cannot open is only two reasons: actuator problems or a valve plate jammed. The actuator may be a bad cylinder, a bad solenoid valve, or a rusty jam.